campusflava

Thursday, July 23, 2015

CRUTECH Post-UTME 2015: Date, Cut-off Mark, Eligibility And Registration Details

It is hereby announced for the information of prospective candidates who made Cross River University of Technology (CRUTECH) their first choice, that the Post UTME Screening Exercise for admission into the 2015/2016 Academic Session will be held on Saturday, 22nd August 2015 at Calabar Campus.

Registration is online.

The Online Registration commences on Monday, 20th July, 2015, and ends onThursday, 20th August, 2015.


PROCEDURE FOR REGISTRATION

To register, Applicants should:

1)Purchase eTranzact Pin at N3,000.00 from any First Bank Branch in Nigeria.

(this excludes Online Registration/Bank Charges)
2)Log on to www.crutech.edu.ng and click on the crutech postutme online application link.
3)Follow the instructions on the Online Application Portal.
4)Print out the Registration Confirmation Slip after a successful registration.

Items to come along with to the Examination Hall:

1)2015 UTME Original Result Slip with your passport photograph on it.
2)CRUTECH Online Registration Confirmation Slip
3)HB Pencil, Sharpener and Eraser.


Note:

1)Only candidates who scored 180 and above in the 2015/2016 UTME Examination are eligible for the Aptitude Test.

2)The CRUTECH Online Registration Confirmation Slip contains your Bio-data,Seat Number, Examination Venue, and This admits you into the Examination Hall.

3)Only candidates who take this Aptitude Test may be admitted into Cross River University of Technology.



GABRIEL BESHEL
Registrar

The Poly Ibadan Post UTME 2015: Date, Cut-off Mark, Eligibility And Registration Details

The Polytechnic Ibadan has announced its post-UTME sales of form for 2015/2016 admission into the following faculties:

1. Faculty of Engineering
2. Faculty of Science
3. Faculty of Environmental Studies
4. Faculty of Financial Management Studies
5. Faculty of Business and communication Studies

Eligibility

(i) Post UTME Screening for ND Programmes
• Candidates applying for the National Diploma Programmes must have attempted the Unified Tertiary Matriculation Examination (UTME) and obtained scores not lower than 150.

• All candidates who made the institution their 1st and 2nd choice in the 2015/2016 Unified Tertiary Matriculation Examination (UTME) OR are interested in changing to The Polytechnic, Ibadan are required to visit the institution's admission website admission.polyibadan.edu.ng for further information on the screening exercise.

• All candidates who did not choose The Polytechnic Ibadan in their JAMB-UTME 2015/2016 or made the institution their 3rd and 4th choice in the 2015/2016 Unified Tertiary Matriculation Examination (UTME) must complete the Change of Course/Institution to make a change to The Polytechnic, Ibadan at the institution's admission website admission.polyibadan.edu.ng

Method Of Application
Applications forms are obtainable on-line at http://admission.polyibadan.edu.ng/

Payment is made using any Verve, Mastercard or VISA ATM Card.

Application Deadline
Deadline - 14th August 2015.

The Poly Ibadan Poly HND/Post- HND Application 2015/2016 Has Commenced

Ibadan Polytechnic Begins Admission Into Full-Time HND, And Post-HND Programmes 2015/2016.

Applications are invited from suitably qualified candidates for Admission into the Higher National Diploma and Post Higher National Diploma Programmes of The Polytechnic, Ibadan for the year 2015/2016 session in the following Faculties:

1. Faculty of Engineering

2. Faculty of Science

3. Faculty of Environmental Studies

4. Faculty of Financial Management Studies

5. Faculty of Business and communication Studies

Method Of Application
Applications forms are obtainable on-line at admission.polyibadan.edu.ng

Cost is ₦7,500 + CBT - N5000

Payment is made using any Verve, Mastercard or VISA ATM Card.

Application Deadline
Deadline - 14th August 2015

Why The New JAMB Admission Policy Is Not As Bad As It Seems

Like we promised, we have been following the new jamb admission policy and have been trying to ascertain the rationale and criteria used by JAMB in determining the eligibility of candidates to participate in their choice schools' post-UTME this year.

Our findings have shown that the policy may not really be as bad as it seems.

JAMB arrived at this new policy basically by considering the number of candidates that applied for the courses approved by NUC in the various schools and the number of applicants per institution.

For instance, statistics has it that, a whopping 607,330 candidates applied to study just in the top ten universities.

This only implies that the carrying capacities of these universities have been outweighed by the number of applicants.

In other to give such candidates that may not be absorbed by these universities opportunity of gaining admission this year, there is need to re-distribute these candidates to other universities that have less than their carrying capacities based on scores and catchment areas.

The import of this is that only the top scorers (say about 20%) in a particular course may be considered eligible to participate in the Post-UTME of their choice institutions. Especially in those institutions that have more candidates than their carrying capacities could contain.


So for candidates who scored the required cut-off mark and yet not eligible to participate in their schools’ post-UTME you may need to consider the following;

1.The probability that you are in the top 20% in your chosen course.

2.If your choice in institution is under your state’s catchment.

So it can be deduced that the main aim for this new admission policy is to balance the admission process. In order to create an almost balanced platform for candidates which will give them a better chance of gaining admission this year.

This is because if JAMB was to go with the status quo, the admission will be partial and greatly tilted to one side and will also disfavour many.

Hallmark University Post-UTME 2015: Date, Cut-Off Mark, Eligibility And Registration Details

Hall mark University has announced its post-UTME sales of form for 2015/2016.

Available Programmes at Hallmark University

1. Faculty of Management and Social Sciences

Departments

Accounting and Finance

B. Sc. Accounting

B. Sc. Banking and Finance

Business Administration

B. Sc. Business Administration

B. Sc. Marketing

Economics

B. Sc. Economics



2. Faculty of Natural and Applied Sciences

Departments

Biological Sciences

B. Sc. Botany

B. Sc. Zoology

B. Sc. Biochemistry

Chemical Sciences

B. Sc. Chemistry

B. Sc. Industrial Chemistry

Mathematical Sciences

B. Sc. Mathematics

B.Sc. Computer Science

B. Sc. Information and Communication Technology

Physics and Energy

B. Sc. Physics

Admission Procedure

All applicants are required to sit for the 2015 Unified Tertiary Matriculation Examination (UTME) and score a minimum of 180

All applicants are required to have credits at SSCE, GCE, NECO, NABTEB or approved equivalents in at least, 5 subjects which must include English Language, Mathematics and three other subjects relevant to the proposed course of study.

The five credits should be obtained in not more than two sittings.

Candidates awaiting results may apply.

All applicants will be required to go through Hallmark University’s Screening Exercise.

Interested candidates who have applied to JAMB for admission and wish to change their choice of University to Hallmark University are required to:

Complete the Hallmark University Application Form online

Download and fill out the JAMB 'Change of Institution' Form
Participate in the Hallmark University screening exercise.

Mode of Application

To complete the application form on-line:

Visit Hallmark University website at www.hallmark.edu.ng to create an identity by applying for Post-UTME

In the course of the pre-registration, you pay a sum of Seven Thousand, Five Hundred Naira (N7, 500.00) only as application form fee.

Alternatively, prospective students can as well initiate payment via ATM cards/Quick teller options at any bank of their choice

or cash deposit at any of the Hallmark University Bank Accounts:
United Bank for Africa (UBA) PLC: Account No: 1019045309
Zenith Bank PLC: Account No: 1012914815
You can also collect application forms after payment at any of the following centres:

Hallmark University, Km 65, Shagamu-Ore Expressway, Ijebu-Itele, Ogun State. Tel: +234 803 409 8174
Vivian Fowler Memorial College for Girls, Plot 5, Balogun Street, Billings Way, Oregun, Ikeja, Lagos.
Topgrade Secondary School, 4 Adedamola Ojomo Close, Off Bode Thomas Street, Surulere, Lagos.
Montessori International Nursery & Primary School, Plot C58, King Perekule Street GRA Phase 2, Port Harcourt.
Cradle School, Plot 6, 12th Street DDPA Ugborikoko, Warri, Delta State.

2015/2016 Post UTME Screening

The candidate will be informed of the date and venue of the Post UTME screening exercise through SMS and e-mails submitted during the application process.

FUTO Post-graduate Application 2015/2016 Announced

The Postgraduate School, Federal University of Technology, Owerri (FUTO) invites applications from suitably qualified candidates for consideration for admission into the underlisted Diploma, Masters and Doctorate Degree programmes for the 2015/2016 session under Regular, Centre for Continuing Education(CCE) and Centre for Women, Gender and Development Studies(CWGDS).

Any interested candidate should pay a non-refundable fee of eleven thousand naira (N11,000.00) exclusive of the switch fee only at any First Bank Branch in the country using the e-Tranzact platform and then complete the online application at apply.futo.edu.ng

B ADMISSION REQUIREMENTS
All candidates applying for any of the following postgraduate programmes must satisfy the basic matriculation requirements including English Language and Mathematics as required by the Department.
1. PGD
Candidates applying for the Postgraduate Diploma (PGD) programme must possess any of the following in addition to English and Mathematics and the basic matriculation requirements of the department:
i Higher National Diploma (HND) Upper Credit and above
ii Bachelors Degree in the relevant discipline from FUTO or any other recognized University with at least a Third Class Honours.
iii A good Bachelors Degree with at least Second Class Honours in other related disciplines.
2. M.Sc, M.Eng, MPH
Candidates applying for the M.Sc. programme must possess any of the following in addition to English and Mathematics and the basic matriculation requirements of the Department:
i A first degree with at least a second class honours qualification with a minimum of 3.00 CGPA on a 5 point scale or 2.50 CGPA on a 4 point scale in the related area from FUTO or from any other recognized university.
iii A Bachelors degree from a recognized university plus a PGD of not less than 3.50 CGPA on a 5 point scale and a 3.00 CGPA on a 4 point scale in the relevant area.
3. MBA
Candidates applying for the MBA programme must possess any of the following in addition to English and Mathematics and the basic matriculation requirements of the Department:
i) A good honours degree in the area of Science/Technology, Engineering and Management Technology from FUTO or from any other recognized university.
ii) Graduates with first degree from a recognized university and holders of Higher National Diploma (HND) with Postgraduate Diploma may apply for the MBA programme
4. Ph.D
Candidates applying for a Ph.D programme must possess in addition to English and Mathematics and the basic matriculation requirements of the Department:
i) A Master’s degree with a CGPA of 4.00 on a 5.00 point scale or 3.00 on a 4.00 point scale or its equivalent in the relevant areas from FUTO or any recognized university
ii) Any other qualification as the University Senate may from time to time recognized/approve.

C. DURATION OF PROGRAMMES
i) Ph.D Programmes: A minimum of six (6) semesters and a maximum of ten (10) semesters for full-time and minimum of eight (8) semesters and a maximum of fourteen (14) semesters for part-time students.
ii) M.Sc, M.Eng, MPH and MBA Programmes: Minimum of three (3) semesters and maximum of six (6) semesters for full-time and minimum of four (4) semesters and maximum of eight (8) semesters for part-time students.
iii) PGD Programmes: Minimum of two (2) semesters and maximum of four (4) semesters for full-time and Minimum of four (4) semesters and Maximum of six (6) semesters for part-time students.
Note: Candidate with Bachelor or Master’s degree in education (B.Ed and M.Ed) need not apply.
D. METHOD OF APPLICATION
[1] Sign-up
Ø Log on to the Url e.g, .apply.futo.edu.ng
Ø Click on Sign-up from the login section
Ø Fill Sign-up form
Ø Log into your email address to activate your account
[2] Applications
Ø Click on Apply link on the Application Form
Ø Click on ''Print Invoice''
Ø Proceed to the Bank to make payment
Ø Re-visit the Apply Portal
Ø Log in with your account details
Ø Click Resume button on ‘My Saved Applications’
Ø Fill the Biodata Form
Ø Submit and Print Application Form
[3] Edit Application (Saved Application Form)
Ø Enter your login details to access the portal apply.futo.edu.ng
Ø Click on “Resume” under “My Saved Applications” to edit
[4] Edit Application (Submitted Application Form)
Ø Enter your login details to access the portal apply.futo.edu.ng
Ø Click on “Preview” under “My Saved Applications” to edit
E DOCUMENTS TO SUBMIT
Candidates should forward the following relevant documents in support of their application to the Deputy Registrar/Secretary, Postgraduate School, Federal University of Technology, Owerri, Imo State.
i. Two photocopies of University degree certificates
ii. Two photocopies of NYSC discharge certificate
iii. Two photocopies of “O” Level Result
iv. Completed Referee Forms from three referees as indicated
v. Two hard copies of the on-line application
SUBMISSION OF ACADEMIC TRANSCRIPTS:
All applicants must forward their transcripts to reach The Secretary, Postgraduate School, Federal University of Technology, Owerri, Imo State, Nigeria, not later than November 30, 2015. Please note that any application without Transcript will not be considered for admission.

CLOSING DATE:
The Website will close on October 30, 2015 and all submission of document as in E above will close on November 30, 2015. All successful candidates will be notified via email/SMS.

F. AVAILABLE POSTGRADUATE PROGRAMMES
1.0 SCHOOL OF AGRICULTURE AND AGRICULTURAL TECHNOLOGY (SAAT)
1.1 DEPARTMENT OF AGRICULTURAL ECONOMICS
M.Sc. and Ph.D Degrees in Agricultural Economics with specialization in:
i) Farm Management and Production Economics
ii) Agricultural Development and Policy
iii) Agricultural Marketing and Cooperatives
iv) Agricultural Finance
v) Agricultural Project Planning and Analysis
vi) Agricultural Resources and Environmental Economics
PGD in Agricultural Economics
1.2 DEPARTMENT OF AGRICULTURAL EXTENSION
M.Sc. and Ph.D Degrees in Agricultural Extension with specialization in:
i) Agricultural Extension Administration
ii) Programme Planning and Evaluation
iii) Rural Sociology
iv) Agricultural Extension Communication
v) Community and Rural Development
vi) Indigenous Knowledge Systems in Agricultural and Rural Development
PGD in Agricultural Extension
1.3 DEPARTMENT OF ANIMAL SCIENCE AND TECHNOLOGY
PGD, M.Sc. and Ph.D Degrees in Animal Science and Technology with specialization in:
i) Animal Breeding and Genetics
ii) Animal Management
iii) Animal Nutrition
iv) Animal Product
v) Reproductive Physiology
PGD in Animal Science and Technology
1.4 DEPARTMENT OF CROP SCIENCE AND TECHNOLOGY
PGD, M.Sc and Ph.D Degrees in Crop Science and Technology with specialization in:
i) Agronomy
ii) Seed Technology
iii) Plant Breeding and Genetics
iv) Farming Systems
v) Crop Physiology
vi) Horticulture and Landscaping
vii) Crop Protection with options in the following:
· Mycology
· Nematology
· Weed Science
· Agricultural Entomology
· Bacteriology
· Virology
PGD in Crop Science and Technology
1.5 DEPARTMENT OF SOIL SCIENCE AND TECHNOLOGY
PGD, M.Sc. and Ph.D. Degrees in Soil Science and Technology with specialization in:
i) Soil Science
ii) Soil Genesis and Classification
iii) Soil Physics/Soil Conservation
iv) Soil Survey and Land-use Planning
v) Soil Microbiology
vi) Soil Fertility
vii) Soil Chemistry
viii) Soil and Environmental Management
PGD in Soil Science and Technology
1.6 DEPARTMENT OF FISHERIES AND AQUACULTURE TECHNOLOGY
M.Sc. in Fisheries and Aquaculture
Ph.D. in Fisheries and Aquaculture
PGD in Fisheries and Aquaculture
2.0 SCHOOL OF ENGINEERING AND ENGINEERING TECHNOLOGY (SEET)
2.1 DEPARTMENT OF AGRICULTURAL ENGINEERING
M.Eng and Ph.D. Degrees in Agricultural Engineering with specialization in:
i) Farm Power and Machinery Engineering Technology
ii) Soil and Water Engineering Technology
PGD in Agricultural Engineering (Note, only candidates with 3rd class are qualified for PGD in Agricultural Engineering)
2.2 DEPARTMENT OF CHEMICAL ENGINEERING
Ph.D Degree in Chemical Engineering with options in:
i) Chemical Reaction Engineering
ii) Process Plant Design
iii) Refinery/Gas Engineering
iv) Separation Processes
v) Simulation and Optimization
vi) Systems Dynamics and Control
vii) Chemical Engineering Thermodynamics
M.Eng. in Chemical Engineering
PGD in Chemical Engineering
2.3 DEPARTMENT OF CIVIL ENGINEERING
M.Eng. and Ph.D Degrees in Civil Engineering with specialization in:
i) Water Resources Engineering
ii) Structural Engineering
iii) Public Health Engineering
PGD in Civil Engineering only
2.4 DEPARTMENT OF ELECTRICAL AND ELECTRONIC ENGINEERING
M.Sc. and Ph.D Degrees in Electrical and Electronic Engineering with specialization in:
i) Electronic Power Engineering
ii) Communication Engineering
iii) Control Engineering
iv) Electronic and Computer Engineering
2.5 DEPARTMENT OF FOOD SCIENCE AND TECHNOLOGY
M.Sc. and Ph.D Degrees in Food Science and Technology with specialization in:
i) Food Microbiology
ii) Food Chemistry and Nutrition
iv) Beverage and Brewing Technology
v) Food Processing Technology
2.6 DEPARTMENT OF MATERIALS AND METALLURGICAL ENGINEERING
M.Eng. and Ph.D Degrees in Materials and Metallurgical Engineering with specialization in:
i) Materials Engineering
ii) Metallurgical Engineering
2.7 DEPARTMENT OF MECHANICAL ENGINEERING
M.Eng. and Ph.D Degrees in Mechanical Engineering with specialization in:
i) Industrial Production Engineering
ii) Energy and Power Engineering
iii) Automated Design and Manufacturing
2.8 DEPARTMENT OF PETROLEUM ENGINEERING
M.Eng. and Ph.D Degrees in Petroleum Engineering with specialization in:
i) Reservoir Engineering
ii) Production Engineering
iii) Drilling Engineering
iv) Natural Gas Engineering
vi) Petroleum Economics
PGD in Petroleum Engineering
2.9 DEPARTMENT OF POLYMER AND TEXTILE ENGINEERING
M.Sc. and Ph.D Degrees in Polymer and Textile Engineering with specialization in:
i) M.Sc. in Polymer Science and Engineering
ii) M.Sc. in Textile Science and Engineering
iii) Ph.D in Polymer Science
iii) Ph.D in Textile Science
3.0 SCHOOL OF MANAGEMENT TECHNOLOGY (SMAT)
3.1 DEPARTMENT OF PROJECT MANAGEMENT TECHNOLOGY
Ph.D, M.Sc. and MBA in Project Management Technology with specialization in:
i) Construction Technology
ii) Manufacturing Systems
iii) Industrial Process Technology
PGD with options in:
i) Construction Technology
ii) Manufacturing Systems
3.2 DEPARTMENT OF MANAGEMENT TECHNOLOGY
PGD, MBA, M.Sc. and Ph.D Degrees in:
i) Financial Management Technology
ii) Management Technology
3.3 DEPARTMENT OF TRANSPORT MANAGEMENT TECHNOLOGY
MBA, M.Sc. and Ph.D Degrees in:
Transport Management Technology with specialization in:
i) Aviation Management
ii) Transport Planning and Management
iii) Maritime Management Technology
MBA options:
i) Sea Transport Management
ii) Air Transport Management
iii) Transport Management
iv) Logistics Management
PGD in Transport Management Technology
3.4 DEPARTMENT OF MARITIME MANAGEMENT TECHNOLOGY
MBA, M.Sc. and Ph.D Degrees in Maritime Management Technology
M.Sc. options:
i) Marine Transport Management
ii) Maritime Economics and Finance

PGD in Maritime Management Technology
3.5 DEPARTMENT OF INFORMATION MANAGEMENT TECHNOLOGY
PGD, MBA, M.Sc. and Ph.D Degrees in Information Management Technology
4.0 SCHOOL OF ENVIRONMENTAL TECHNOLOGY (SOET)
4.1 DEPARTMENT OF ENVIRONMENTAL TECHNOLOGY
M.Sc. and Ph.D Degrees in Environmental Technology with specialization in:
i) Pollution Control Technology
ii) Flood and Erosion Control Technology
iii) Geo-Environmental Technology
PGD in Environmental Technology
5.0 SCHOOL OF SCIENCE (SOSC)
5.1 DEPARTMENT OF BIOCHEMISTRY
M.Sc. and Ph.D Degrees in Biochemistry with specialization in:
i) Industrial Biochemistry
ii) Environmental Biochemistry
iii) Medical Biochemistry
iv) Pharmacology Biochemistry
v) Nutrition and Toxicological Biochemistry
PGD in Biochemistry
5.2 DEPARTMENT OF BIOTECHNOLOGY
M.Sc. and Ph.D Degrees in Biotechnology with specialization in:
i) Biotechnology
ii) Environmental Health Biology
5.3 DEPARTMENT OF CHEMISTRY
M.Sc. and Ph.D Degrees in Chemistry with specialization in:
i) Chemical Quality Control and Industrial Safety
ii) Analytical Chemistry
iii) Mineral Processing
iv) Organic Chemistry
vi) Physical Chemistry
vii) Inorganic Chemistry
viii) Environmental Chemistry
PGD with specialization in
i) Environmental Chemistry
ii) Chemical Quality Control and Industrial Safety
5.4 DEPARTMENT OF COMPUTER SCIENCE
M.Sc. and Ph.D Degrees in Computer Science.
5.5 DEPARTMENT OF GEOSCIENCES
M.Sc. and Ph.D Degrees in Geosciences with specialization in:
i) Geophysics
ii) Petroleum Geology/Sedimentology
iii) Hydrogeology
iv) Environmental Geology
PGD Geosciences
5.6 DEPARTMENT OF MATHEMATICS
M.Sc. and Ph.D Degrees in Mathematics with specialization in:
i) Industrial and Applied Mathematics
ii) Differential Equations
iii) Control Theory
iv) Elasticity
v) Semi-Group Theory
5.7 DEPARTMENT OF STATISTICS
M. Sc. and Ph.D Degrees in Statistics:
i) Time Series Analysis
ii) Econometrics
iii) Probability Theory
iv) Multivariate Analysis
v) Demography
PGD in Statistics
5.8 DEPARTMENT OF MICROBIOLOGY
M.Sc. and Ph.D Degrees in Microbiology with specialization in:
i) Food/Industrial Microbiology
ii) Medical Microbiology
iii) Environmental Microbiology
PGD in Applied Microbiology
5.9 DEPARTMENT OF PHYSICS
PGD, M.Sc. and Ph.D Degrees in Physics with specialization in:
i) Solid State Physics
ii) Materials Science
iii) Solar Energy Physics
iv) Space Physics
6.0 SCHOOL OF HEALTH TECHNOLOGY (SOHT)
6.1 DEPARTMENT OF PUBLIC HEALTH TECHNOLOGY
M.Sc and Ph.D in Public Health Technology with specialization in:
i) Environmental Health and Safety Technology
ii) Epidemiology and Disease Control Technology
iii) Disease Control Technology
iv) Health Promotion and Wellness Technology
v) Health Economics
PGD in Public Health Technology (PGDPH)
6.2 DEPARTMENT OF BIOMEDICAL TECHNOLOGY
M.Sc. Degrees in Physiokinetics and Biomedical Technology with specialization in:
i) Medical Electronics and Instrumentation
ii) Clinical Engineering
vi) Rehabilitation Engineering
G CENTRE FOR WOMEN, GENDER AND DEVELOPMENT STUDIES (CWGDS)
1) PGD with specialization in:
(i) Women and Gender Studies
(ii) Gender and Entrepreneurship
(iii) Gender and Global Health
(iv) Gender and Agricultural Technology
2) M.Sc Degree Programme
(i) Gender and Development Studies
(ii) Gender and Science
(iii) Gender and Technology
(iv) Gender and Agricultural Technology
(v) Gender and Global Health
(vi) Gender and Entrepreneurship
H. PROGRAMMES AVAILABLE AT THE CENTRE FOR CONTINUING EDUCATION (CCE)
SCHOOL OF MANAGEMENT TECHNOLOGY (SMAT)
1. DEPARTMENT OF PROJECT MANAGEMENT TECHNOLOGY (MBA, PGD)
i) MBA and PGD in Project Management Technology
2. DEPARTMENT OF MANAGEMENT TECHNOLOGY (MBA, PGD)
i) Financial Management Technology
ii) Management Technology
3. DEPARTMENT OF INFORMATION MANAGEMENT TECHNOLOGY (MBA, PGD)
i) MBA and PGD in Information Technology
4. DEPARTMENT OF TRANSPORT MANAGEMENT TECHNOLOGY (MBA, PGD)
i) Land Transport Management
ii) Transport Economics and Planning (MBA only)
v) Air Transport Management
vi) Water Transport Management
Signed
Orje Ishegh-Nor
Registrar, FUTO

RSUST Post-UTME 2015: Date, Cut-Off Mark, Eligibility And Registration Details

All candidates who chose the Rivers State University of Science and Technology during the 2015 Unified Tertiary Matriculation Examination (UTME) and have received notification to that effect from JAMB are hereby requested to take note of the following:-

i. The screening exercise for admission of candidates will be administered only on candidates who chose RSUST and have received notification to that effect from JAMB.

ii Only candidates who scored 180 and above in the Unified Tertiary Matriculation Examination (UTME) are qualified for the screening exercise in all the Faculties of the University.

iii. Candidates must possess the basic five (5) O’ level credit passes in accordance with the University’s Entry Requirements (Faculty/Departmental) before applying for the screening Exercise. It is mandatory that Candidates should upload their O ‘Level results and a scanned copy of their passport photograph. However, candidates who are awaiting
their O’level results may apply but should so indicate.

iv Candidates are expected to register for the screening exercise On-line by logging onto www.ust.edu.ng and making e-payment of Six Thousand, and Thirty Naira (N6,030.00) only, using Interswitch Verve enabled cards, comprising Four Thousand, Two Hundred and Eighty Naira (N4,280.00) Examination Fee, Six Hundred Naira (N600.00) for Computer Demonstration Exercise and One Thousand, One Hundred and Fifty Naira
(N1,150.00) for Brain Friend Study CD.

v Candidates are to note that the mode of screening exercise is ELECTRONIC. It is important that candidates practice how to use the computer especially the use of mouse and keyboard before they turn up for the screening exercise. In addition, the Information Technology Centre (ITC) may be conducting a 1-week demonstration session prior to the examination date to candidates for the screening exercise.

vi The registration for the Post-UTME screening exercise will start from Thursday 23rd July, 2015 and end on Thursday 13th August, 2015.

SCHEDULE FOR THE SCREENING EXERCISE
The Post-UTME screening exercise will take place from Monday 17th August, 2015 to Friday 21st August, 2015 at the Information Technology Centre (ITC) of the University.

Candidates are requested to please note that the Post-UTME screening exercise is as scheduled in the screening exercise slip they printed out after their On-line registration. The
scheduled date, time and venue shall be indicated in the Post-UTME examination slip.

Consideration will not be given to candidates who fail to appear for the screening exercise on the scheduled date and time.

All candidates for the screening exercise are required to come to the examination venue with their Post-UTME exam slip printed out during the On-line Post-UTME registration.

You are also advised to come along with your JAMB Original Result slip with your passport photograph on it.


Candidates should note that GSM phones WILL NOT BE ALLOWED into the Examination hall during the Post-UTME screening exercise.

Parents, Guardians and Well-wishers are advised to stay away from the venue of the screening exercise.

Candidates must report at the examination venue one (1) hour before the scheduled exam time on their exam slip.

Further details about the screening exercise can be obtained on-line at www.ust.edu.ng

It is important to note that the names of successful candidates for admission shall be published on the same site (
www.ust.edu.ng.). We wish all candidates a successful screening exercise.

Candidates are advised to check if they are eligible to apply for the screening before making application.

The list of eligible candidates are contained in the
pdf file here