Learn How to Make a Cheap Chipboard Using Locally Available Materials

N.B For more information and updates visit www.campusflava.com

1. 1
   Visit a forest or where there are many trees and collect the sticky type of glue found at the buck of the tree
2. 2
   Visit the sawmill and collect very fine sawdust then come back to the site where you are to manufacture your product.
3. 3
   Collect some water in a basin of about ten litres in proportion of the area in square feet of your to be product.
4. 4
   Collect pieces of Timber with thickens of one inch square and remember to carry ten meters string long.

Make the Frame

1. 1
   Make a wood frame with cross halving joints of the size of the chipboard you want to make as the molder.
2. 2
   Mix water with the glue and sawdust in the ratio of 1:2:3.
3. 3
   Use the frame to make a network of crossing strings in the middle.
4. 4
   Use the frame as the molder.
5. 5
   Let it dry for about 12 hours.Then you will find your chipboard ready

Learn How to Make a Chocolate Syrup and Sprinkles Phone Cover

Would you like to create a fun, new look for your phone, iPod, or other device? You've come to the right place. All you need is your device's case, and some nail polish!

N.B For more information and updates visit www.campusflava.com

Steps

1. 1
   If your case is dark colored: Paint the whole thing with a white nail polish. If your case is already white, or another light color, just skip to the next step.
2. 2
   Now paint it all pink, or whatever color your favorite ice cream flavor is.
3. 3
   After this is dry, take your cotton swab and dip it in your brown polish. Make a large dot right above the middle of your case. Ever so slightly lift up the cotton swab and drag it up to the top. You have your first drip! Do this a couple more times beside the first one. You can choose to make your drips longer or shorter next to the first one.
4. 4
   After this is completely dry, take a striper or toothpick and dip it in your white polish. Draw relatively short lines with it in different directions all over the chocolate syrup. (Or whatever color/flavor you decided for it to be.)
5. 5
   Now fill in the white lines with your favorite colors for sprinkles.
6. 6
   Apply a top coat over the chocolate and sprinkles.Tips

• You could do this in your favorite flavors of ice cream and syrup!
• If you want to take this off later, just use nail polish remover.
• Make sure you let each coat dry completely before handling again.

Warnings

• Every layer MUST be dry before proceeding. Otherwise, it won't look as well as you would have hoped.

Things You'll Need

• Pink nail polish
• Brown nail polish
• White nail polish
• Red, blue, green, yellow, orange, and purple nail polish. (Optional)
• One or two toothpicks
• One or two cotton swabs
• Nail polish remover (optional)

Learn How to Make a Colorful Heart Pillow

Do you often do DIY small stuff by yourself? This article has a tutorial of how to make a heart pillow this time. The approach of how to make a heart pillow is mainly to piece colorful pieces of fabric together. Before you start making pillows, you need to select several pieces of fabric that you like. You'd better make sure all the pieces of fabric you have selected can be matched well.

N.B For more information and updates visit www.campusflava.com

 Steps

1. 1
   Piece the fabric. Cut off the fabric you have selected. You can leave each fabric to different widths at will; fix the pieces to a whole pattern with pins; sew each combination respectively.
   
   
   

   
2. 2
   Sew two pieces of heart fabric. Draw a heart shape to a size which you want your pillow to be on the paper; cut off the paper heart. Cut the pieced fabric to a heart shape according to the paper pattern. Make the other pieces of heart fabric in the same; seam the two pieces with obverse sides faced, leaving a small opening.
   
   
   

   
3. 3
   Stuff the heart. Turn over the heart to the observe side; stuff the quilting inside through the small opening. Sew the small opening after stuffing.
   
   
   

   
4. 4
   Make a bow with satin ribbon; sew the bow to the middle top of the heart.
   
   
   

Things You'll Need

• Cotton fabric
• Sewing threads
• Satin ribbon
• Needle
• Quilting
• Scissors
• Paper
• Pen
• Pins

Learn How to Make a Crown

Whether for a party or a play, a crown can complete an outfit and turn you into king or queen for the day. There are various types of crowns that you can make, from different materials. A few are suggested here to provide you with a good choice.

N.B For more information and updates visit www.campusflava.com

 Steps

Printable Template

Crown Template

Basic paper crown

This is a typical "king or queen" style crown. If you make it from metallic color cardboard, it'll even look like a precious metal crown.

1. 1
   Purchase suitable poster board or cardboard. Choose either gold or silver colors, unless you're matching the crown to the outfit's color.
   
   
   
2. 2
   Click on the template provided here. Print off to copy. If it needs enlarging, do so using a grid.
   
   
   
   • Cut out the template once printed and enlarge as needed.
     
     
     
   • The first line indicated on the template shown here is simply for a shorter crown, perhaps more suitable for a princess or prince crown, while the longer one is more suited for a king or queen crown.
     
     
     
3. 3
   Lay the template down on the wrong side of the cardboard. Trace around it carefully. Then cut out the crown.
   
   
   
4. 4
   Right side facing outward, cut out the crown shape.
   
   
   
5. 5
   Draw the edges of the crown together to form a circle. Allow for a little overlap. To check that the head size is accurate, place on the wearer's head. Use paperclips to keep the exact spot before you secure it.
   
   
   
6. 6
   Secure the crown. Either glue or staple into place.
   
   
   
   • If stapling, it's recommended that you place pieces of tape over the staples to prevent the metal pieces from catching on the hair.
     
     
     
7. 7
   Decorate the crown. There are lots of possibilities here but in general, use artificial gems to give it a sense of regal jewels (or even fruit gums or other candies can be used if you don't plan on keeping the crown long). It's also nice to add rows of braid or rickrack, ribbon and such to provide breaks between the gems and create a sense of design on the crown.
   
   
   
8. 8
   Cut a strip of fake fur the same diameter as the crown. Glue around the base of the crown. This will give it a regal finish. Trim anything that may need trimming.
   
   
   
9. 9
   Try the crown on once it has dried.
   
   
   
   • It's not usual to add elastic but if it's going to be windy outside, a small round of elastic can be stapled or taped to keep the crown on. If you've fitted it well, this shouldn't really be needed though.

Reinforcing a paper crown

If a crown needs to be used repeatedly, such as for stage work, it pays to strengthen it. This can be done as follows:

1. 1
   Make the crown. The paper crown above is a good one to use. However, instead of using just one layer of cardboard, cut out two. Adhere both pieces of cardboard together with glue or double-sided tape, being careful to match up all edges.
   
   
   
2. 2
   Cut out a strip of linen or other strong fabric. The strip needs to be the same diameter as the crown.
   
   
   
3. 3
   Glue or staple the linen to the inner side of the crown. If stapling, you'll need to use the artificial gems or a braid, etc., to cover up the staples on the outside of the crown.
   
   
   
4. 4
   Wear repeatedly. It should last a few good wears before it shows signs of dishevelment.
   
   
   

Floral princess crown

This is a pretty crown made from real flowers. It's best when the flowers are in full bloom and is something to make in the garden.

1. 1
   Pick your flowers. Find a bouquet of flowers with bendable stems at least 3 inches (7.5cm) in length (longer is better).
   
   
   
   • The flowers chosen can be of only one type of flower, or a variety.
   • Examples of suitable flower types include: rose, lavender, daisy, clover, violet, daffodil, flax, and the tulip.
2. 2
   Hold three flowers in your hand. Braid them together. Hold the few flowers in your hands, placing the blossoms next to one another in a row, while keeping the stems together. Then simply braid the stems.
   
   
   
   • If you're working with real flowers, be gentle so that you don't break the stems.
3. 3
   Continue adding flowers. Add a flower to the braid before you reach the end of the current stems. Hold it with one of the stems and braid as though the two stems were one. Keep on adding new flowers and extending the chain in this way.
   
   
   
   • Alternate flower varieties to enhance color, texture, and beauty.
4. 4
   Check the length. Every once in a while, keep an eye on the length to avoid making it too long or too short.
   
   
   
   • If too short, continue adding more flowers.
   • If too long, carefully remove some flowers to reach your desired length.
5. 5
   Finish the crown. Complete the floral crown by weaving the end stems into the first flower stems. Tuck in the loose ends into the chain. Make sure it is tight enough to not fall apart.
   
   
   
6. 6
   Crown the princess! It's time for the final step: crowning the lucky girl with your beautiful floral creation. Whether it's for you or another girl, make sure it's worn with delight!
   
   
   

Princess wire floral crown

This is an artificial flower crown that can be worn a number of times.

1. 1
   Use sparkling gold or silver wire. This can be purchased from stationery stores or craft stores.
   
   
   
2. 2
   Wrap the wire around the princess's head approximately 3 times. Secure the end by wrapping it around the join of the three strands. Make sure no wire is sticking out that might hurt the wearer.
   
   
   
   • The crown should fit snugly but not too tightly on the head. The circle should look smooth.
     
     
     
3. 3
   Wrap artificial flowers around the wire crown. Either use a garland or strip of flowers or weave in individual artificial flowers. Secure with the wire or florist's tape.
   
   
   
4. 4
   Cut curly ribbon. Choose at least four colors. Cut two lengths of each color to 6 feet (1.8 meters).
   
   
   
   • Slip knot the curly ribbon at the back of the wire crown, at the center of the ribbon (about 3 feet/91cm in).
     
     
     
   • Eight ribbon strands should flow down the back of the crown. Adjust the length if necessary.
     
     
     
5. 5
   Use the blunt edge of the scissors and curl the ribbon to the end.
   
   
   
6. 6
   Done. The crown is now fit for your little princess to wear.
   
   
   

Napoleon's crown

This leafy crown is a twist on the standard crown with jewels.

1. 1
   Find a paper bag large enough to fit over the wearer's head. A grocery bag is ideal and is the standard used for the measurements given here.
   
   
   
2. 2
   Draw an outline of a crown around the entire bag. The top should be drawn as a line of upward facing leaves. The base can be straight or in bumps, as wished. Part of the success of this crown depends on measurements:
   
   
   
   • Keep the base of the crown 2 1/2" (6.5cm) above the base of the bag at the front and gradually reduce it around the sides toward the back.
     
     
     
   • Keep the width of the crown at 4 inches (10cm) at the front and reduce to 3 1/2" (8cm) at the sides and back of the bag.
     
     
     
3. 3
   Cut out 12 large and 12 small leaf shapes. You can use metallic gold card for this part.
   
   
   
4. 4
   Use double-sided tape to attach the leaves to the crown. Place the leaves diagonally, with their tips facing the front center of the crown.
   
   
   
   • Work from the front center, outward.
     
     
     
   Tips

• Crowns can be made from felt as well. Use the cardboard crown method outlined above and glue felt all the way around the outside, in the shape of the crown. This will both strengthen the crown and gives it more solidity to look at, especially useful for a stage crown.

Things You'll Need
 
The following items will vary according to project:

• Scissors
• Paper
• Ruler and pen/marker
• Fabric
• Decorations
• Printer
• Grid chart
• Paper bag

Learn How to Make a Cut Water Bottle for Your Rodent

You can make your rodent's water bottle decorative. It is fun and creative. Why not?

N.B For more information and updates visit www.campusflava.com

 Steps

1. 1
   Take your pet's water bottle and non toxic markers.
2. 2
   Take your water bottle and draw cute animal designs.
3. 3
   Write your pet's or pets' name on it.
4. 4
   Put it on the cage.
5. 5
   
   
   
   

 Tips

• You can maybe glue buttons or sequins on.
• If you don't have a water bottle they are available at all pet stores.

 Warnings

• Make sure you use non toxic glue and markers.
• If you glue the sequins or buttons on make sure they are glued well otherwise the rodent might tear them off and choke on it.
• If you add sequins or buttons make sure they aren't facing the rodent.

Things You'll Need

• Water Bottle
• Markers
• Sequins, glue, buttons (optional)

Learn How to Make a DIY Mega Tic Tac Toe Board

Looking for a fun party game that can be played in the backyard? If you are fan of tic-tac-toe and have a little space you can create an oversized tic-tac-toe board very easily.

 N.B For more information and updates visit www.campusflava.com

Steps

Making Your Tic-Tac-Toe Board

1. 1
   Unwrap shower curtain and lay on a flat surface. It may be creased so consider doing this a few days before the party. If you don’t have time to “de-crease” it days ahead of time, lay a sheet over the top and apply a warm iron to the sheet.
2. 2
   Create the tic-tac-toe lines with the tape. You will ultimately have nine boxes with the tape. If necessary, find a measuring tape to create even boxes. You will need three boxes across the top, middle and bottom of the curtain.
3. 3
   Divide the Frisbees into groups (one color for each group).

Playing the Game

1. 1
   Invite two players to participate and ask each player to choose his/her set of Frisbees. Instead of X’s and O’s you’ll have different colored Frisbees (i.e. pink team and blue team).
2. 2
   Draw a line that is a few feet away from the tick-tack-toe board where the participants will have to stand behind.
3. 3
   Flip a coin to see which player goes first. Or you could draw straws or using any other method of making that decision.
4. 4
   Have the first player try to throw the Frisbee to the first square. If the Frisbee is a little outside the square move it into place.
5. 5
   Play tic-tac-toe where whichever player gets all three across wins.

 Tips

• Instead of using a shower curtain, you could use an old white sheet to transform into the board.
• Play an adult version of the game where the first person to get the Frisbee in the square chooses another party goer to take a drink.

Things You'll Need

• 1 shower curtain, plain, large and plastic shower curtain
• Blue painter’s tape or thin duct tape
• Approximately 10 Frisbees––five in one color and five in a different color (the Frisbees represent your “X’s” and “O’s”.)
• Party favors or prizes

Learn How to Make a Finger Family

Finger families can be fun for every one! You can start your finger family at school when your done with work,at work when your done with work or maybe at home when your bored. Follow these steps and you'll be the proud creator of a finger family!

N.B For more information and updates visit www.campusflava.com

 Steps

1. 1
   Plan out your family. Figure out which person you want on each finger and which family members you want. For example, with five fingers, you can position them as such: the dad goes on the index finger, mom on the middle finger, big bro or sis on the ring finger and little bro or sis on the pinky. Grandma, grandpa, or a pet can be on the thumb.
   
   
2. 2
   Start drawing your happy family on the opposite hand you draw with. Feel free to be colorful! You can add hair, clothes and faces with funny emotions.
   
   
3. 3
   Play. When your faces don't smudge, start to play with them.
   
   
4. 4
   Clean up. You can wash them off when your done or wait and play with them tomorrow!
   
   

Tips

• Use non-toxic washable markers.