How to Install Wind Booster Throttle Controller

WIND BOOSTER 4-MODE throttle controller can control electronic throttle response speed freely. It can accelerate the response speed of the throttle to enhance the instantaneous speed performance; and can also slow down the throttle response speed to increase the comfort in driving and protection in environment. please refer to windbooster1.blog.com

N.B Visit www.campusflava.com for more updates 

 Steps

1. 1
   Put 4-MODE adapter back to original vehicle's throttle plug. Glued to the monitor in the center console where you think is convenient to operate and view.
2. 2
   Pull out the original car's electronic throttle plug, then put the adapter into the accelerator pedal socket, at last, insert the original vehicle throttle plug into the adapter.
   

   Pull out the original vehicle's throttle plug
3. 3
   Connect the 4-mode adapter to the plug.
   

   Connected 4-MODE adapter to plug
4. 4
   Adjust the monitor, until it is fixed in the center console.

Monitor is fixed in the center console

 Tips

• As shown below is the operation interface, there are 3 buttons, which in turn is MENU button, minus, plus button. In the middle is 4-MODE throttle controller' status indicator on the left indicates the current mode, in which there are a total of P1, P2,Econ, Normal four models; In the three mode of P1, P2, Econ ,progress bar on the right indicates current sensitivity of the operation, a total of 10 paragraphs can be adjustable for sensitivity;
  • Mode P1 is ordinary motion mode, in this mode, the throttle's response speed increase more than the Carmax, by minus, plus buttons to adjust the sensitivity in this mode until reaching the appropriate value you think .
  • Mode P2 is the highest motion mode, in this mode, throttle's response speed is increased by 50% than P1 mode, by plus, minus button to adjust the sensitivity in this mode, until reaching appropriate value you think.
  • Econ model is fuel-efficient mode, this model can save fuel, but throttle's response speed reduce somewhat than the Carmax, by plus, minus button to adjust the sensitivity in this mode, until reaching appropriate value you think.
  • Normal mode is the original vehicle mode, which restores the original car status.